Back Panel; Status Light - Geneva AeroSphère Large Installationsanleitung

BAckPAnEl
Input for external FM / DAB antenna.

STATUS lIGhT

yellow
green ( constant )
green ( slowly blinking )
green ( fast blinking )
green ( single flashing, repeating )
green ( double flashing, repeating )
yellow / green / red ( changing )
how to eject the cD
You can eject the CD with the following methods:
• Hold your hand about 10 mm above the CD slot. The CD eject
sensor is located above the CD slot. It detects the hand with a
proximity sensor.
• Use the button on the remote control
• Use the eject icon in the AeroSphère app
12
radio antenna connector:
F-Type connector.
Analog audio input
3.5 mm connector
AeroSphére Base is starting up, this takes about 20 seconds
Successfully connected to the Wi-Fi network and successfully connected to at least one
AeroSphère speaker
Successfully connected to the Wi-Fi network
In the process of connecting to the Wi-Fi network
Wi-Fi setup in progress ( WPS method )
Wi-Fi setup in progress ( network setup webpage method )
Software update in progress
Wi-Fi SETUP:
Press: WPS push button setup method
Hold for 10 seconds: Network webpage setup method
Dc power input
Connect to the AC power adapter connector
Power switch
Status light
Shows current status, Power On / Off
see details below