Adjusting The Roll-Off Filter; Maintenance; Service; Version - Beyerdynamic MC 840 Produktinformation

Adjusting the roll-off filter

The microphone is equipped on the rear (left hand side)
with a two stage roll-off filter switch, which attenuates the
low-frequency response at either 80 Hz or 160 Hz by 6 dB per
ocatve.

Maintenance

For cleaning metal surfaces, use a soft, damp cloth using
only gentle cleansing agents (such as washing-up liquid). Take
care not to allow any water drops into the microphone and do
not use any solvent cleaners.
Clean the PS 740 pop shield and the WS 740 wind shield in clear
water. All parts should be completely dry before they are used
again.

Service

In the unlikely event of equipment failure, the product
should be returned to your beyerdynamic dealer. Failure to do
so will invalidate the guarantee.

Version

Model
MC 840

Optional Accessories

Pop shield/Wind shield
PS 740
WS 740/834
Microphone cables
BMC 05 FM
BMC 10 FM
Stands
GST 400
GST 500
10
Description . . . . . . . . . . . . . . . . . Order #
Studio condenser microphone
with MKV 11 and EA 37 . . . . . . . . 482.838
Pop shield, black . . . . . . . . . . . . . . 401.897
Wind shield, charcoal-grey . . . . . . 401.994
Standard microphone cable
XLR-XLR, 5 m . . . . . . . . . . . . . . . . . 434.787
Standard microphone cable
XLR-XLR, 10m. . . . . . . . . . . . . . . . . 434.795
Microphone stand, 3/8",
height 0.90 - 1.65 m,
with G 400 boom. . . . . . . . . . . . . . 421.294
Microphone stand, 3/8",
height 0.85 - 1.60 m,
with telescopic G 500 boom . . . . . 406.252