Product Information Mce 72; Application; How To Insert The Battery; Putting Into Operation - Beyerdynamic MCE 72 Produktinformation

PRODUCT INFORMATION MCE 72

Thank you for selecting the MCE 72 stereo
condenser microphone. Please take some time to read
carefully through this product information before
using the product.

Application

The MCE 72 has been developed for XY
recording. It is suitable for stereo recording in home
studio applications, concert recordings with DAT or
MD, film, video and interviewing.

How to insert the Battery

Unscrew the lower part of the microphone
anti-clockwise and insert the supplied alkaline battery
(1.5 V) into the battery compartment according to the
polarity marks.
Screw the lower part of the microphone clockwise
onto the upper part.
Important
• If you do not use the microphone for several
weeks or months, please remove the battery as it
can discharge (due to stand-by current) or leak
after some time and damage parts of the micro-
phone. Even "leak proof" may leak after some
time. Damage caused by leaking batteries is not
covered under warranty.
• Please do not throw used battery packs away
with your household rubbish, but take them to
your local collection points.

Putting into Operation

The MCE 72 can be used battery-powered only.
Phantom power is not possible.
Using the switch the microphone can be switched on
and off and the battery status can be checked.
Position "OFF": Battery power or microphone is
switched off.
Position "B.C." Battery condition is checked. The
red LED is illuminated when the
battery has full capacity.
10