Yamaha HAIBIKE SDURO HardSeven RC 2016 Originalbetriebsanleitung Seite 96

English
14. TROUBLESHOOTING
PUSHING ASSIST FUNCTION
Symptom
The pushing assist
function turns off.
POWER SUPPLY OF EXTERNAL DEVICES VIA USB CONNECTION
Symptom
Power is not supplied.
96
Check
Did the tires lock for a
few seconds?
Did you pedal while the pushing assist
function was running?
Check
Is the display unit's power on?
Is the USB version correct?
Is the USB cable firmly connected?
Is the USB receptacle or USB plug
terminal dirty or wet?
Action
Remove your finger from the pushing assist switch for a moment,
and then press it again.
Take your feet off the pedals, and remove your finger from the
pushing assist switch for a moment, and then press it again.
Action
Press the power switch on the display unit to turn the power on.
Use an external device that complies with USB 2.0.
Re-connect the USB cable.
Disconnect the USB cable from the display unit and external
device. Remove the dirt and water on the USB receptacle and USB
plug terminal and re-connect the cable.