Yamaha HAIBIKE SDURO HardSeven RC 2016 Originalbetriebsanleitung Seite 75

Headlight "On/Off" (Applies only to models equipped with a headlight powered

by the battery pack. The taillight, which is powered by the battery pack, is swit-
ched on/off with the headlight.)
Each time you press the Light switch, the headlight switches between "On" and "Off".
Pushing assist

When you are on or off the bicycle and start moving it, you can use pushing assist without pedaling
the bicycle.
To use pushing assist, press and hold the pushing assist switch.
Pushing assist will stop in the following situations:
• When you release the pushing assist switch.
• If you press another switch at the same time.
• When you start to pedal.
• If your bicycle speed exceeds 6 km/h.
• If you select Off mode.
• If the wheels are not turning (when braking or coming into contact with an obstacle, etc.).
Clock and km/mile settings

Use the following steps to set the time and km/mile settings.
1. Make sure that the display is mounted on the display holder, and that the display unit
is turned off.
2. Press the power switch while holding the function select switch.
English
75