Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Vivid, Standard and Gentle no individual values can
GB
be stored. Select the mode with the button
or
and confirm the selection with the button
"MENU".
Video parameters
Brightness
Contrast
Hue
(only for NTSC sources)
Saturation
Sharpness
If the respective menu item has been se -
lected, press the button "MENU" to activate it.
The menu disappears and an adjusting scale
is inserted at the bottom of the picture.
Increase or decrease the value with the but-
ton
or
. To return to the menu, press the
button "MENU" or "SOURCE".
Note: If another picture mode than User has been
menu item Picture Mode), the adjustment is
adjusted (
automatically changed to User as soon as the value is
changed for one of the video parameters.
Noise Reduction
If the menu item Noise Reduction has been se lected,
press the button "MENU" to activate it. The
noise reduction can be activated in three levels
( Low, Mid, High) or be deactivated (OFF). Select the
setting option with the button
firm the selection with the button "MENU".
Color Temp (colour temperature)
If the menu item Color Temp has been selected,
press the button "MENU" to activate it. For the
picture mode adjusted via Picture Mode, one of
the five colour temperatures can be selected:
Warmer, Warm, Normal, Cool, Cooler. Select the colour
temperature with the button
firm the selection with the button "MENU".
Note: For the picture modes Standard, Gentle and User the
colour temperature is adjusted together (i. e. when a
colour temperature is selected for one of the three
modes, this also applies to the other two modes).
R Gain (proportion of red)
G Gain (proportion of green)
B Gain (proportion of blue)
For each of the five colour temperatures a fine
adjustment can be made by changing the pro-
portion of red, green and blue. If the respective
menu item has been selected, press the button
"MENU" to activate it. Then increase or
decrease the value with the button
When the adjustment is terminated, press the
button "SOURCE" to deactivate the menu item.
To return to the main menu level, press the but-
ton "SOURCE".
9.2 Submenu "Audio"
If the menu "Audio" has been selected, press the
button "MENU" to activate it: the first menu item
is selected (highlighted in colour). The menu
items can be selected with the buttons
Audio parameters
Audio Bass
Audio Treble
Audio Balance
note below
If the respective menu item has been
selected, press the button "MENU" to activate
it. Then increase or decrease the value with
the button
or
. When the adjustment is
terminated, press the button "SOURCE" to
deactivate the menu item.
SRS TrueSurround (surround sound effect)
note below
AutoVolume
Without function for this model
12
Audio Effect (sound mode)
If the menu item Audio Effect has been selected,
press the button "MENU" to activate it. The
following sound modes are available: Normal,
Club, Dance, Live, Pop, Rock, User (corresponds to Nor-
mal). Select the mode with the button
and confirm the selection with the button
"MENU".
To return to the main menu level, press the but-
ton "SOURCE".
Note: As this model is only designed for mono repro-
duction, the preset value (0 or OFF) should be kept for the
menu items Audio Balance and SRS TrueSurround.
9.3 Submenu "PC"
This menu is only available for the source PC at
the VGA input (12).
If the menu "PC" has been selected, press the
button "MENU" to activate it: the first menu item
is selected (highlighted in colour). Select the indi-
vidual menu items with the button
Auto Adjust (automatic picture adjustment)
If the menu item Auto Adjust has been selected,
press the button "MENU" to activate it. The
or
and con-
menu is exited and Auto Adjust is inserted for the
time of the adjustment. During this process,
manually adjusted values for the other menu
items of this menu are corrected.
Parameters for manual picture adjustment
Horizontal Position
Vertical Position
Phase
or
and con-
Clock (pixel clock)
If the respective menu item has been
selected, press the button "MENU" to activate
it. Then make the adjustment with the button
or
:
Horizontal Position
Vertical Position
Phase
Clock
or
.
When the adjustment is terminated, press the
button "SOURCE" to deactivate the menu
item.
To return to the main menu level, press the but-
ton "SOURCE".
9.4 Submenu "Setting"
If the menu "Setting" has been selected, press
and
.
the button "MENU" to activate it: the first menu
item is selected (highlighted in colour). The menu
items can be selected with the buttons
Language (menu language)
If the menu item Language has been selected,
press the button "MENU" to activate it. Four
languages are available: English, German and two
Asian languages. Select the language with
the button
with the button "MENU".
PIP (multi-picture, also see chapter 8.7)
If the menu item PIP has been selected, press
the button "MENU" to activate it. A submenu
with four menu items PIP Mode, PIP Position, PIP Source,
PIP Swap is shown. Select the desired menu item
with the button
or
or
.
moving the picture to the
left ( ) or right ( )
moving the picture
downwards ( ) or upwards ( )
to optimize sharpness and
picture stability, decrease ( )
or increase ( ) the value
for fine adjustment of the picture
width: if vertical stripes occur in the
picture, decrease ( ) or increase
( ) the picture width
and
or
and confirm the selection
or
.
PIP Mode (display mode)
If the menu item PIP Mode has been selected,
press the button "MENU" to activate it. Six
display modes are available:
None
no multi-picture display
"picture in picture"
Small
small sub-picture in the main picture
Medium
medium-sized sub-picture in the main
picture
Large
large sub-picture in the main picture
"picture next to picture", screen divided
MLSR 4 : 3
pictures reduced to format 4 : 3
MLSR Full
pictures in full screen format
Select the display mode with the button
or
and confirm the selection with the but-
ton "MENU".
PIP Position (position of the sub-picture)
If the menu item PIP Position has been
selected, press the button "MENU" to acti-
vate it. For the three picture-in-picture dis-
plays the position of the sub-picture in the
main menu can be selected: Left Up (on the
top left), Right Up (on the top right), Left Dn (on
the left at the bottom), Right Dn (on the right at
the bottom). Select the position with the
button
or
and confirm the selection
with the button "MENU".
PIP Source (source of the sub-picture)
If the menu item PIP Source has been selected,
press the button "MENU" to activate it.
Select the signal source for the sub-picture
with the button
or
"SOURCE" to deactivate the menu item.
Main picture
Selectable for the sub-picture
AV 1
AV 2
S-Video
PC
AV 1, AV 2, S-Video, DVI, HD
DVI
AV 1, AV 2, S-Video, PC
HD
AV 1, AV 2, S-Video, PC
PIP Swap (swap of the picture assignment)
If the menu item PIP Swap has been selected,
press the button "MENU" to activate it. The
on-screen menu is exited and the assign-
ment of the sources to main picture and
sub-picture is swapped.
To exit the submenu PIP, press the button
"SOURCE".
Sleep Mode
Via this menu item a time can be defined after
which the monitor is automatically set to
stand-by. If the menu item Sleep Mode has been
selected, press the button "MENU" to activate
it. Select the time (10 minutes ... 180 minutes)
or the setting OFF (function switched off) with
the button
or
. Confirm the selection with
the button "MENU".
Image Auto Move (automatic picture movement)
To prevent shadow images (= persistence of
.
previous picture contents, may occur with
longer still pictures), an automatic picture
movement can be activated at regular time
intervals. If the menu item Image Auto Move is
selected, press the button "MENU" to activate
it. Select the time intervals (every 10 minutes
... every 180 minutes) or the setting OFF (func-
tion switched off) with the button
firm the selection with the button "MENU".
Gamma (gamma value)
For brightness correction of the grey scale
values the gamma value may be changed. If
the menu item Gamma has been selected, press
the button "MENU" to activate it. Select the
. Press the button
PC, DVI, HD
PC, DVI, HD
PC, DVI, HD
or
. Con-
Werbung
Inhaltsverzeichnis
