8 SAFETY
8.1 Intended Use
The MFW 228 must only be used for its intended purpose! Any other use is deemed to be a case
of misuse. To use the machine properly you must also observe and follow all safety regulations,
the assembly instructions, operating and maintenance instructions lay down in this manual.
The MFW228 is used for:
Grinding, drilling, polishing, engraving, cleaning wood, metal and plastic.
Any manipulation of the machine or its parts is a misuse, in this case HOLZMANN-
Machines and its sales partners cannot be made liable for ANY direct or indirect
damage.
8.2 Security instructions
Missing or non-readable security stickers have to be replaced immediately!
To avoid malfunction, machine defects and injuries, read the following security instructions!
The locally applicable laws and regulations may specify the minimum age of the operator and limit
the use of this machine!
HOLZMANN MASCHINEN Austria
Keep your work area dry and tidy! An untidy work area may cause
accidents. Avoid slippery floor.
Make sure the work area is lighted sufficiently
Do not overload the machine
Provide good stability and keep balance all times
Avoid abnormal working postures! Make sure you stand squarely and
keep balance at all times.
Keep away from the running drill!
Always stay focused when working. Reduce distortion sources in your
working environment. The operation of the machine when being tired,
as well as under the influence of alcohol, drugs or concentration
influencing medicaments is forbidden.
Respectively trained people only and only one person shall operate
the machine.
Do not allow other people, particularly children, to touch the machine
or the cable. Keep them away from your work area.
Make your workshop childproof.
Wear suitable work clothes! Do not wear loose clothing or
jewellery as they might get caught in moving parts and cause
severe accidents! Wear a hair net if you have long hair.
Use personal safety equipment: dust musk and safety goggles when
working with the machine.
www.holzmann-maschinen.at
Qualitäts-Multifunktionswerkzeug-SET / quality-multitool-SET
SAFETY
Seite 11
MFW 228