Technical Data; Intended Use - Conrad Electronic 75 06 04 Bedienungsanleitung

Technical Data

Radio camera:
Operating voltage: 10 V DC (power pack)
6 V DC (battery operation 15 V (battery operation 10
4 x AA alkaline)
Power consumption: 600 mA
Transmission frequency 2.4 GHz
Channels 3
Brightness 0 Lux with IR illumination
(approx. 1m)
Video output level
Audio output level mono
Audio/video connection
sockets
Image sensor 1/4" b/w CMOS
Horizontal resolution 300 TV lines
Microphone Condenser microphone,
mono
Image b/w
Range: approx. 100 m with
free view
Operating temperature 0°C to +50°C
Weight approx. 170 g (without batteries)
Dimensions without antenna
L x W x H in mm 114 x 73 x 60
Power Packs
Operating voltage: 230 V~ / 50 Hz
Output voltage: 10 V DC / 600 mA
38
Monitor:
13,5 VDC (power pack)
type C)
1500 mA
2.4 GHz
3
1 Vp-p / 75 Ohm
1 Vp-p / 600 Ohm
Cinch
350 lines
Mono
b/w
1.640 g (without batteries)
210 x 175 x 165
230 V~ / 50 Hz
13,5 V DC / 1500 mA
Table of Contents
Introduction ..............................................................................................................22
Intended Use ............................................................................................................23
Operating Elements (fold-out page) .........................................................................25
Connection and Operating Elements .......................................................................25
Safety and Hazard Notices ......................................................................................27
Installing and Connecting the Devices.....................................................................30
Installing the Radio Camera .....................................................................................31
Connecting the Radio Camera.................................................................................31
Installing the Monitor................................................................................................32
Connecting the Monitor ...........................................................................................32
Commissioning.........................................................................................................34
Maintenance.............................................................................................................35
Disposal....................................................................................................................36
Troubleshooting .......................................................................................................36
Technical Data..........................................................................................................38
CE Declaration of Conformity .................................................................................39

Intended Use

The application range of the radio camera system comprises object monitoring with
sound and video. It serves to survey and secure hidden from view respectively criti-
cal areas (as shop monitoring or in entrance sections, etc.).
Please note that it is a criminal offence to observe strangers with this camera without
their knowledge and consent The sound and video transmission to the surveillance
monitor takes place wireless with a frequency of approx. 2.4 GHz (gigahertzt).
The integrated IR (infrared) illumination even allows operation in absolute darkness.
The audio and video signal (AV) can be displayed on the B/W monitor via an optional
cinch cable for further processing, for example recording with a video recorder. A
mirrored display on the monitor is possible (inverted display).
The receiver and the radio camera are only designed for connection to the supplied
power packs. Short-term operation is also possible with batteries for the camera
and the monitor (batteries not included).
The receiver for the radio camera and a TV tuner for terrestrial TV programs is inte-
grated in the b/w monitor.
23