Troubleshooting; Disposal; Manufacturer's Warranty - Tools; Ec Declaration Of Conformity (Original) - Hilti TE DRS-6-A Bedienungsanleitung

8.3 Maintenance
Check all external parts of the module for damage at
regular intervals and check that all controls operate fault-

9 Troubleshooting

Fault
Excessive dust emission.
The drill bit is not centered in
the suction head.

10 Disposal

Most of the materials from which Hilti tools or appliances are manufactured can be recycled. The materials must
be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for
taking back old tools and appliances for recycling. Ask Hilti customer service or your Hilti representative for further
information.

11 Manufacturer's warranty - tools

Please contact your local Hilti representative if you have
questions about the warranty conditions.

12 EC declaration of conformity (original)

Designation:
Type:
Generation:
Year of design:
We declare, on our sole responsibility, that this product
complies with the following directives and standards:
2006/42/EC, until 19th April 2016: 2004/108/EC, from
20th April 2016: 2014/30/EU, 2006/66/EC, 2011/65/EU,
EN 60745‑1, EN 60745‑2‑6, EN ISO 12100.
Possible cause
The dust container is full.
The suction head is defective.
The suction head brush is worn.
The dust removal module is not cor-
rectly fitted to the power tool.
Dust removal module
TE DRS‑6‑A
01
2009
lessly. Do not operate the appliance if parts are damaged
or when the controls do not function faultlessly. If neces-
sary, the appliance should be repaired at a Hilti repair
center.
Remedy
Emptying the dust container
Replace the suction head.
Replace the suction head.
Fit the dust removal module to the
power tool correctly.
Hilti Corporation, Feldkircherstrasse 100,
FL‑9494 Schaan
Paolo Luccini
Head of BA Quality and Process Man-
agement
Business Area Electric Tools & Ac-
cessories
05/2015
Technical documentation filed at:
Hilti Entwicklungsgesellschaft mbH
Zulassung Elektrowerkzeuge
Hiltistrasse 6
86916 Kaufering
Deutschland
en
Tassilo Deinzer
Executive Vice President
Business Unit Power
Tools & Accessories
05/2015
11