auna Soundstorm 2.0 Bedienungsanleitung Seite 11

Before using the device as a stand-alone amplifier, you will have to charge the battery. When the battery is
charging, the BATTERY INDICATOR lights solidly. After the battery has fully charged, the light switches off.
• Connect the AC adaptor to the DC IN JACK of the speaker firmly, and plug it into a wall outlet.
• When the battery is fully charged, first disconnect the AC adaptor from the speaker, then from the wall
outlet.
• Press the POWER SWITCH to turn on the speaker. Press the POWER SWITCH again to turn the speaker
off. Pull the AC adaptor out of the wall outlet if you want to switch off completely.
Before using your speaker with a BT device for the first time, you must pair and connect it to the BT device.
Press the POWER SWITCH to turn on the speaker, then press the MODE button to select BT mode . The BT
LED starts to flash, and the speaker is now in pairing mode.
Pairing via NFC (Android)
• With Near Field Communication (NFC), you can easily pair and connect the speaker to Android device
with NFC.
• If the Android device supports NFC, activate its NFC feature, and touch the NFC area of the speaker
with the NFC area of your Android device. The speaker pairs and connects to the Android device auto-
matically. For details on NFC, see the user guide of the Android device.
• For other BT devices, pair the speaker manually.
Power on/off
DC In 2
USB port 3
AUX In 4
Battery LED 5
BT LED 6
Guitar input 7
Microphone input 8
MODE 9
EQ/FD 10
Initial Use
BT Function
1 11 Light on/off
12
/ -
13
/ station scan
14
/ +
15 Volume knob
16 Echo knob
17 Mic volume knob
18 Battery compartment
19 NFC area
11
www.auna.de