Minimum Distances - Zanussi ZCV65020WA Bedienungsanleitung

Minimum distances

Dimension
A
B
Levelling
Use small feet on the bottom of appliance to
set same level of cooker top surface with other
surfaces
Anti-tilt protection
Caution! You must install the anti-tilt
protection. If you do not install it, the
appliance can tilt.
Your appliance has the symbol shown on the
picture (if applicable) to remind you about the
installation of the anti-tilt protection.
22
B
A
A
mm
2
685
Important! Make sure you install the anti-tilt
protection at the correct height.
1. Set the correct height and area for the ap-
pliance before you attach the anti-tilt pro-
tection.
2. Install the anti-tilt protection 77 mm down
from the top surface of the appliance and
49 mm from the left side of the appliance
into the circular hole on the bracket (see
fig.). Screw it into the solid material or use
applicable reinforcement (wall).
3. You can find the hole on the left side at
the back of the appliance (see fig.).
Lift the front of the appliance (1) and put it
in the middle of the space between the
cupboards (2). If the space between the
bench cupboards is larger than the width
of the appliance, you must adjust the side
measurement to centre the appliance.
Make sure that the surface behind the ap-
pliance is smooth.
www.zanussi.com