Switching The Coffee Machine Off; Setting The Water Hardness; Making Coffee With Beans - AEG Electrolux CP 2 Serie Gebrauchsanweisung

822_949_318 CP2..._defnep.book Seite 34 Freitag, 2. November 2007 6:30 18
g
4.4 Switching the Coffee Machine
Off
If you switch the coffee machine off
with the "On/Off" key (Fig. 3, h)
after you have finished making coffee,
the machine carries out a flush pro-
gram, during which time the "Empty
grounds container" indicator (Fig. 3, j)
flashes for about 1 minute as a
reminder. If you switch the coffee
machine off with the "On/Off" key (Fig.
3, h) while a function is running,
all functions are immediately switched
off.
4.5

Setting the Water Hardness

After first placing the machine in use
or when using a different water quality
you should set the machine to the
water hardness level corresponding to
the local water hardness. You can use
the included test card to determine the
water hardness, or contact your local
water supply company.
Determining water hardness
0 Dip the test strip in cold water for
around 1 second. Shake off the excess
water, and gauge the hardness by
means of the pink bands.
No pink bands or one pink band:
Hardness 1, soft
up to 1.24 mmol/l, or
up to 7° German hardness, or
up to 12.6° French hardness
Two pink bands:
Hardness 2, medium hard
up to 2.5 mmol/l, or
up to 14° German hardness, or
up to 25.2° French hardness
Three pink bands:
Hardness 3, hard
up to 3.7 mmol/l, or
up to 21° German hardness, or
up to 37.8° French hardness
Four pink bands:
Hardness 4, very hard
over 3.7 mmol/l or
over 21° German hardness, or
over 37.8° French hardness
34
Setting and saving the water
hardness level
You can set 4 hardness levels. The cof-
fee machine is factory-set to hardness
level 4.
0 With the machine switched on, turn the
bean container to the "Coffee Beans"
position (Fig. 10).
0 With the machine switched on, press
and hold the "Clean" key (Fig. 3, f)
0 Now repeatedly press the "Coffee
Quantity" key (Fig. 3, c)
have selected the required hardness
level. Release the "Clean" key. The
selected value is now saved. The indi-
cation changes back to the Coffee
Quantity.
The hardness levels are indicated as
follows:
Hardness level 1
Hardness level 2
Hardness level 3
Hardness level 4
Interrogate the set water hardness
3
level: With the machine switched on,
turn the bean container to the "Coffee
Beans" position . Press and hold the
"Clean" key (Fig. 3, f)
hardness level is now indicated.
5

Making Coffee with Beans

The following process for making cof-
fee with beans runs completely auto-
matically: Grinding, portioning,
pressing, pre-brewing, brewing, ejec-
tion of the coffee grounds.
The facility to select the grinding tex-
ture and the coffee quantity allows
you to individually set up the coffee
machine to your own personal taste.
1 Ensure that you use only pure coffee
beans with no caramelised or aroma-
tised additives. Do not use frozen
beans.
.
until you
. The set water