Troubleshooting - Siemens HB 24 D 561 Gebrauchsanweisung

Troubleshooting

Problem
The Á water display is
flashing even though the g g
container is full.
The display panel is blank.
The time is not correct.
The oven lamp is not working.
Steam or water escapes from
the air vent during cooking.
There is a plop" noise during
cooking.
The oven cannot be set.
46
Malfunctions often have simple explanations. Please
read the following instructions before calling the
after sales service:
Possible cause
The container has not been
pushed in properly.
The recognition system is
not working.
Power cut
The electronics are
defective.
Power cut
The bulb is faulty.
Cold/warm effect of frozen
food, caused by the steam.
The childproof lock is
active. ( p symbol in the
display field)
Repairs may only be carried out by fully trained
after sales service technicians.
Incorrect repairs may result in serious injury to the
user.
Comments/remedy
Make sure that the container has
engaged.
Call after sales service.
Check the power supply.
Call after sales service.
Reset the time.
Change the bulb. See the Changing
the bulb" section.
This is normal.
This is normal.
Deactivate the childproof lock.