Frost Protection; Faults - Kärcher BR 40/25 C Bp Handbuch

Replacing the disk brushes
 Empty the dirty water reservoir.
 Press the appliance down using the
push handle.
 Turn the running gear to the front with
your foot.
 Turn the button for setting the advance
speed in – direction.
 Raise the disk brushes.
 Turn the disk brushes through approxi-
mately 45°.
 Remove the disk brushes downwards.
 Insert the new disk brushes in reverse
sequence.
 Set the advance speed.
 Turn the running gear to the rear with
your foot.
Maintenance contract
To ensure a reliable operation of the appli-
ance maintenance contracts can be con-
cluded with the competent Kärcher sales
office.

Frost protection

In case of danger of frost:
 Empty the fresh and dirt water reser-
voirs.
 Store the appliance in a frost-protected
room.

Faults

Danger
Risk of injury. Turn the program selection
switch to "OFF" and disconnect the mains
plug before performing any works on the
appliance.
Place the appliance on a stable, even sur-
face and disconnect the battery.
 Drain and dispose of the dirt water and
the residual fresh water.
In case of faults that cannot be remedied
using the table below please contact the
customer service.
– 11
EN 27