Choosing The Automatic Program - Minipack-Torre Pratika 56 Anweisungen Zur Bedienung Und Wartung

Chapter 5. Machine adjustment and setting up
To memorise any modifications executed, press the " Program configuration " and "Save" keys.

5.2.6. Choosing the AUTOMATIC program

To select an AUTOMATIC PROGRAM ensure the machine is in "CONDITION: Automatic STOP" and carry out the
procedure described above.
Press the "Program
configuration" button.
The next 2 screens indicate the
manual settings to apply to the
machine.
Press CONTINUE.
Press the CLOSE button.
▼
Press the arrow to view the list
of saved programs.
The first screen reminds you of the
data with the manual settings to run on
the Pratika 56:
•
number of micro-punches to use,
•
positioning of the film reel,
•
positioning of the return roller,
•
positioning of the film
wheels,
•
any activation of the air blow.
Press TUNNEL SETTINGS
screen only appears if the Tunnel
coupled with the machine
selected in the CONFIGURATION
menu).
At this point, press the
button to run the AUTOMATIC
cycle.
46
Once you have selected the
program, press the "Load"
button.
The second screen reminds
you of the data with the
manual settings to run on the
coupled retraction tunnel:
•
belt speed,
•
tunnel temperature,
roller
•
position of air deflectors.
Press OK .
(this
was
START
EN