Deleting A Program; Choose The Language; Pause Time - Minipack-Torre Pratika 56 Anweisungen Zur Bedienung Und Wartung

Chapter 5. Machine adjustment and setting up

5.2.8. Deleting a program

To delete a saved program, simply load the program (e.g. P2) and proceed as follows:
Press the "Delete" button.

5.2.9. Choose the language

To choose the language used on the display screen follow the procedure described below.
Press the "Setup" button.

5.2.10. Pause time

This function is used to programme the machine's "pause" time.
During this phase the sealing bar resistors switch off (a condition that ensures considerable energy savings), while all of
the other machine functions stay on.
This function is useful when you wish to switch off the resistors for a given amount of time, and when said amount of
time has elapsed, they will heat up again (for example, this function is very useful for workers who, when they finish their
lunch break, start their shift again and need to have the machine at the right temperature, ready to work; or for
maintenance procedures requiring adjustments with the sealing bars off).
Press the PAUSE TIME key.
Press the "YES" button. At this point the program has been deleted.
Press the "Choosing
language" button.
Press the keys for hours (h) and
minutes (MM) to set the required
pause time (minimum
minutes).
Press the START key and then
 .
48
the It displays the list of available
languages:
IT (Italian), EN (English),
FR (French), DE (German),
ES (Spanish), PT (Portuguese),
CS (Czech), NL (Dutch),
TR (Turkish), RU (Russian).
Press the key that corresponds
to the language you wish to use
and then the  button.
The main screen will display the
amount of time remaining until
15 the machine will start up again.
EN