Ottobock Cubic Foam 476C00 Gebrauchsanweisung Seite 12

3.2 Basic Data
5 cm
Cubic Foam
5 cm
Combi Foam
Front: 10 cm
Contour Gel
Rear: 6 cm
Structure of the seat cushions
Foam: B75N PUR ester; colour: dark grey
Cubic Foam
Cover: decor fabric, black
Support layer of foam: B75N; colour: grey
Combi Foam
Relax foam: B60RL; colour: pink
Final foam layer: B1625; colour: white
Cover: decor fabric, black
Foam wedge: B75N; thickness: 70 mm tapering to 30 mm; colour: dark grey
Contour Gel
Support layer of foam: B75N; thickness: 30 mm; colour: dark grey
Final layer: TechnoGel 130; thickness: 1.5 mm; colour: white
Cover: decor fabric, black
* ready-to-use state
4 Liability
The manufacturer's warranty applies only if the device has been used under the conditions and for
the purposes described. The manufacturer recommends that the device be used and maintained
according to the instructions for use.
The manufacturer is not responsible for damages caused by components and spare parts not
approved by the manufacturer. Repairs must be carried out exclusively by authorised dealers or
by the manufacturer.
5 CE Conformity
This device meets the requirements of the 93 / 42 / EEC guidelines for medical devices. This
device has been classified as a class I device according to the classification criteria outlined in
appendix IX of the guidelines. The declaration of conformity was therefore created by Ottobock
with sole responsibility according to appendix VII of the guidelines.
12 | Ottobock
Seat cushion
thickness*
650 g
600 g
1100 g
Weight* Permissible
patient weight
150 kg /330 lbs
Cubic Foam/Combi Foam/Contur Gel
Reference size*
40 x 40 cm