Introduction; Features; Accessories; Precautions For Proper Operation - JVC RM-P2580 Bedienungsanleitung

1. INTRODUCTION

FEATURES

Presetting of up to 100 positions (including the home positions) each, for up to 8 combination cameras.
Built-in PAN, TILT and ZOOM control for up to 8 cameras.
RS-485 connection system enables cascaded connection of cameras.
Built-in sequential switcher.
Alarm input terminals.
Data I/O terminals for interlocked operation with external peripherals.

ACCESSORIES

Power cord (2 m)

PRECAUTIONS FOR PROPER OPERATION

Do not install the unit in a place subject to direct sunlight,
excessive moisture, dust, or vibrations where ventilation is
poor.
Be careful of strong radio waves and magnetism:
If the unit is near a source of strong magnetism, such as a
radio or TV transmission antenna, power transformer or
motor, the video signal may be subject to interference.
Always use the power cord provided with or specified for
this unit.
CLEAN EXTERIOR
● Wipe gently with a soft cloth.
● Put cloth in diluted mild soap and wring it well to wipe off
heavy dirt. Then wipe again with a dry cloth.
To save energy, be sure to turn off the system when not in
use.
E-4
Ferrite Core
Precautions for the PRESET SEQUENCE and AUTO PAN Operations
The life-span of the PRESET SEQUENCE and AUTO PAN
functions is dependent on which camera model is used in
combination with this unit.
When using the TK-C655 and TK-C676 cameras, the guar-
anteed zoom lens operation count is 200,000 times. If the
zoom lens operation is used often, the life-span of the PRE-
SET SEQUENCE and AUTO PAN functions may be much
less than expected.
(Example) Assuming that a ZOOM operation is performed
200,000 x 2 (times) ÷ 60 (minutes) ÷ 24 (hours) = 277 (days)
Total operations count
For other camera models, please refer to the Handling &
Installation Instructions manuals of the camera in use.
Instructions (this manual)
every minute and the camera is used 24 hours
a day:
Daily operating hours