Auto Pan Operation - JVC RM-P2580 Bedienungsanleitung

2. BASIC OPERATIONS

AUTO PAN OPERATION

The AUTO PAN operation consists of low-speed horizontal movement of a camera between preset positions
at a constant time interval.
Automatic panning is set between 2 points.
This function can be set on individual cameras.
SET button POSITION display
CAMERA CAMERA
SETUP SETUP
PO POWER WER
ALARM ALARM
MENU MENU SET SET
KEY LOCK KEY LOCK
LENS LENS CAMERA/POSITION
1 2
SPEED SPEED
4 5
IRIS IRIS
CLOSE CLOSE OPEN OPEN
FOCUS FOCUS
7 8
NEAR NEAR FAR FAR
AF
0
WIDE WIDE ZOOM ZOOM TELE TELE CLEAR CLEAR
/HOME /HOME
E-14
RM-P2580 RM-P2580
REMOTE CONTROL UNIT REMOTE CONTROL UNIT
POSITION POSITION
AUTO AUTO F-1 F-1 F-2 F-2 F-3 F-3
PAN/TILT PAN/TILT
3
CAMERA POSI- POSI-
TION TION
6
OPTION OPTION OPTION OPTION
1 2
9 AUTO AUTO
PAN PATROL
ENTER ENTER
AUTO PAN PAN/TILT
button control lever
1.
Press the AUTO PAN button. The LED indicator lights up
and the AUTO PAN operation starts.
The POSITION display shows "
NOTE
During the AUTO PAN operation, the PAN/TILT control
lever can be operated only in the TILT direction ( ).
2.
To stop the AUTO PAN operation, press the AUTO PAN
button again.
NOTES
● The AUTO PAN operation also stops when a preset
position is selected or the AUTO PATROL operation
is started.
REF. : "POSITION SELECTION" on Page 11 and
"AUTO PATROL OPERATION" on page 15.
● The AUTO PAN operation is set on the CAMERA
SCREEN ( REF. : Page 28). Open the camera menu
screen to perform the setting.
As the rest of the setting procedure is variable de-
pending on the camera models, please refer to the
Instruction manual of the connected camera.
A
" at this time.