Commissioning Of The Device - STEAMAX MAG Bedienungsanleitung

STEAMAX MAG – COMMISSIONING OF THE DEVICE
Operating Instructions
Fully charge the two necessary and replaceable 18650 batteries before first use. Please take note of the positive
and negative poles in the battery compartment. Ensure that there is no visible damage to the surface of the
battery cells. The device has a 510-pin connection with a spring-loaded connector, making it suitable for a variety
of sub-ohm-capable clearomizers.
How to install the Batteries
Open the battery compartment by pressing the silver button. Then place the two charged 18650 batteries in the
device according to the poles indicated. Close the battery compartment.
1
68
www.steamax.com
Note: If the display does not light up after switching
the device on, make sure that you have inserted the
batteries correctly and that they have sufficient power. If
the device still cannot be switched on despite fulfilling
all the aforementioned prerequisites, please contact our
customer service department,