Electrical Wiring Connection - Daikin FWC07AATNMV1 Installationsaleitung

Kaltwasser-ventilatorluftkühler

Inhaltsverzeichnis

Verfügbare Sprachen

This is proposed wiring connection. It may change subject to the chiller unit and must comply with the local and national code and regulations.

Model: FWC07AATNMV1 / FWC08AATNMV1 / FWC10AATNMV1 / FWC11AATNMV1 / FWC12AATNMV1

FCU 1

VALVE

3WV

Chiller

Model: FWC07AATNMV1 / FWC08AATNMV1 / FWC10AATNMV1 / FWC11AATNMV1 / FWC12AATNMV1

CAUTION !

FIELD SUPPLY WIRING

WITH JUMPER FOR HEAT PUMP

WITHOUT JUMPER FOR COOLING

WITH JUMPER FOR VALVE APPLICATION

WITHOUT JUMPER FOR VALVELESS APPLICATION

Note : Unit comes in standard heatpump and for valve application.

IMPORTANT: *

These values are for information only. They should be checked and selected to comply with local and/or

national codes and regulations. They are also subject to the type of installation and size of conductors.

** The appropriate voltage range should be checked with label data on the unit. A main switch or other means

for disconnection, having a contact separation in all poles, must be incorporated in the fixed wiring in

accordance with relevant local and national legislation.

Model

Voltage range**

Recommended fuse*

Power supply cable size* mm

Number of conductors

•

All wires must be firmly connected.

•

All wires must not touch the water piping, or any moving parts of the fan motor.

•

The power supply cord must be equivalent to H05VV-F (60227 IEC 52 or 60227 IEC 53) which is the minimum

requirement, and to be used in protective tube.