Radio - Kenwood KDC-X5200BT Bedienungsanleitung

GETTING STARTED
F/W UPDATE
UPDATE SYSTEM
F/W UPDATE YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated).
xxxx For details on how to update the firmware, visit <www.kenwood.com/cs/ce/>.
FACTORY RESET YES: Resets the settings to default (except the stored station). ; NO: Cancels.
CLOCK
CLOCK DISPLAY ON: The clock time is shown on the display even when the unit is turned off. ;
OFF: Cancels.
ENGLISH
Select the display language for [FUNCTION] menu and music information if
РУССКИЙ applicable.
By default, [ENGLISH] is selected.
ESPANOL
Change the crossover type
1
Press repeatedly to enter STANDBY.
2
Press and hold number buttons 4 and 5 to enter crossover select.
The current crossover type appears.
3
Turn the volume knob to select "2WAY" or "3WAY", then press the knob.
4
Turn the volume knob to select "YES" or "NO", then press the knob.
The selected crossover type appears.
• To cancel, press and hold
• To adjust the selected crossover settings, ( 18, 19).
Caution
Select a crossover type according to how the speakers are connected.
( 28, 29)
If you select a wrong type:
• The speakers may damage.
• The output sound level may be extremely high or low.
.

RADIO

Search for a station
1
Press repeatedly to select RADIO.
2
Press repeatedly to select FM1/FM2/FM3/MW/LW.
3 Press S / T to search for a station.
• To change the searching method for S / T: Press
repeatedly.
AUTO1 : Automatically search for a station.
AUTO2 : Search for a preset station.
MANUAL : Manually search for a station.
• To store a station: Press and hold one of the number buttons
(1 to 6).
• To select a stored station: Press one of the number buttons
(1 to 6).
Other settings
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item ( 6), then press
the knob.
3 2
Repeat step until the desired item is selected/activated or
follow the instructions stated on the selected item.
4
Press and hold to exit.
To return to the previous setting item, press .
5
ENGLISH