Technical Data; Ec Declaration Of Conformity - Husqvarna TS 100R Bedienungsanleitung

Technical data

Standard
Power, kW 2,2 kW
(3 CV)
Voltage (±5%), V 230
(50 Hz)
Current, A 10
Pump 10 W,
230 V
Motor speed, rpm 2800
Disc speed, rpm 2800
Electrical protection IP 54
Depth of cut (E) at 100
90°, mm
Depth of cut (E) at 80
45°, mm
Length of cut (L), 1900/1200 (thickness 100 mm)
mm
1000/1300 (thickness 120 mm)
Useable width (to Unlimited, (Width of support with
the right) (l), mm extension = 600mm)
Space below disc (P), 120
mm
Dimensions (depen- 1420/1720 x 840 x 1400
ding on model)
(100R/130R) (with legs)
1420/1720 x 625 x 790 (100R/130R)
(bench)
Weight (depending 106/126 (100R/130R) 7 legs
on model), kg
Disc cooling Water spray into the disc casing
Minimum tank 55/65
capacity, l Lg: 1,30 m
Electricity supply 230 V (H07-RNF 3 x 1,5
400 V (H07-RNF 5 x 1,5
115 V (H07-RNF 3 x 2,5
Noise emissions (see note 1)
Sound power level, measured dB(A)
Sound power level, guaranteed dB(A)
Sound levels (see note 2)
Sound pressure level at the operators ear, dB(A) 92
Vibration levels, a (see note 3)
hv
Handle, m/s
2
Note 1: Noise emissions in the environment measured as
sound power (LWA) in conformity with EN 12418.
Note 2: Noise pressure level according to EN 12418. Reported
data for noise pressure level has a typical statistical disper-
sion (standard deviation) of 1.0 dB(A).
Note 3: Vibration level according to EN 12418. Reported data
for vibration level has a typical statistical dispersion
(standard deviation) of 1 m/s
20
- English
Operator's manual - TS 100 R
Option
2,9 kW 1,5 kW 1,5 kW
(4 CV) (2 CV) (2 CV)
400 230 115
(50 Hz) (50 Hz) (50 Hz)
11,5 12,5 20
10 W, 10 W, 30 W,
230 V 230 V 115 V
- L 3 m)
2
- L 3 m)
2
- L 3 m)
2
1 03
104
2,6
.
2

EC declaration of conformity

Husqvarna AB, SE-433 81 Göteborg, Sweden, tel: +46-
31-949000, declares under sole responsibility that the tile
saw Husqvarna TS 100 R dating from 2010 serial numbers
and onwards (the year is clearly stated on the rating plate,
followed by the serial number), complies with the require-
ments of the COUNCILíS DIRECTIVE:
• of May 17, 2006 "relating to machinery" 2006/42/EC
• of December 15, 2004 "relating to electromagnetic
compatibility" 2004/108/EC.
• of December 12, 2006 "relating to electrical equip-
ment" 2006/95/EC.
•
of May 8, 2000 "relating to the noise emissions in the
environment" 2000/14/EC. Conformity assessment according
to Annex V.
•
of June 08, 2011 on the 'restriction of use of certain hazardous
.
substances' 2011/65/EU
The following standards have been applied: EN ISO
12100:2010, EN 55014-1:2006, EN 55014-2/A1:2001, EN
61000-3-2:2006, EN 61000-3-11:2000, EN 12418+A1:2009.
Gothenburg 12 April 2015
Helena Grubb
Vice President, Construction Equipment Husqvarna AB
(Authorized representative for Husqvarna AB and
responsible for technical documentation.)