Preface To The Manual; General Safety Instructions; Special Instructions - Husqvarna TS 100R Bedienungsanleitung

Preface to the manual

Before leaving our factory every machine passes an exact-
ing inspection programme in which everything is checked
minutely.
Following the instructions will ensure that your machine
gives long service, in normal operating conditions.
The user advice and spare parts mentioned in this docu-
ment are given as an indication, and do not constitute an
undertaking. No warrantee will be granted in the event
of errors or omissions, or for damage occurring during
delivery, or caused by the design or use of the machine. We
are very concerned about the quality of our products and
we reserve the right to make any technical modifications
to improve them, without warning.
This document will:
• provide the user with: information about the machine
• information about its possible uses
• prevent accidents due to unsuitable use, by an un-
trained person, during maintenance, repairs, overhauls,
handling or transport
• improve the reliability and durability of the machine
• ensure correct use, regular maintenance, and fast fault
finding in order to reduce repair costs and downtime.
The manual should always be available at the place of
work. It should be read and used by any person install-
ing or using the machine.
The obligatory technical regulations in force in the
country where the machine is used must also be ad-
hered to for maximum safety.
The manufacturer declines any responsibility resulting
from improper use, or modifications.

General safety instructions

The use of symbols on machines (in color) and in the
manual identify advice concerning your safety.
WARNING
Danger symbol
OBLIGATION
Blue background, white marking : obligatory
safety red marking : movement forbidden
WARNING
Black triangle and marking on a yellow
background : danger if not adhered to. Risk of
injury to the user or third parties, with possi-
bility of damage top the machine or the tool.
PROHIBITION
Red circle with or without bar : use or pres-
ence prohibited.
14
- English
Operator's manual - TS 100 R
INFORMATION
Information - Instruction: special instruc-
tions concerning use and inspection.
This symbol indicates that the machine is
in conformance with the applicable Euro-
pean directive.
Environmental marking. Symbols on the
product or its packaging indicate that this
product cannot be handled as domestic
waste.
By ensuring that this product is taken care
of correctly, you can help to counteract the
potential negative impact on the environ-
ment and people that can otherwise result
through the incorrect waste management of
this product.
For more detailed information about recy-
cling this product, contact your municipality,
your domestic waste service or the shop from where you
purchased the product.

Special instructions

The disc cutter is designed to provide safe and disc reliable
service in operating conditions corresponding with the
instructions, but it can present dangers for the user and
risks of damage, consequently regular on site inspection is
necessary to ensure :
• Perfect technical condition (use for the purpose for
which it is intended and taking into account any risks,
and correction of any malfunction detrimental to
safety).
• Use of a diamond disc for water lubricated cutting of
marble, stone, granite, brick and facings (porcelain,
glazed tiles, ceramics, etc). The use of any other disc is
forbidden (abrasive, saw, etc).
• Competent personnel (qualifications, age, training, ed-
ucation) who have studied the manual in detail before
starting work: any fault of an electrical or other nature
must be checked by a competent person (electrician,
maintenance foreman, authorized dealer, etc).
• That the warnings and instructions marked on the
machine are followed (adequate personal protection,
correct use, general safety instructions, etc).
• That no modification, transformation or addition is
detrimental to safety and that it is carried out without
prior authorization from the manufacturer.
• Respect of the maintenance intervals and periodical
checks recommended.
• That only genuine spare parts are used for repairs.