Beurer BC 60 Gebrauchsanweisung Seite 24

Weight Approx. 119 g (without batteries)
Cuff size 125 to 215 mm
Permissible operating +10 °C to + 40 °C, ≤ 85 % relative
conditions air humidity (non-condensing),
700 –1060 hPa ambient pressure
Permissible storage - 5 °C to + 50 °C, ≤ 85 % relative air
and transport con- humidity
ditions
Power supply
2 x 1,5 V
Battery life For approx. 250 measurements,
depending on the blood pressure
level and/or pump pressure
Accessories Instruction for use, 2 x 1.5 V AAA
batteries, storage box
Classification Internal supply, IPX0, no AP or
APG, continuous operation, type BF
applied part (cuff)
Maximum surface Device: 43,3 °C
temperature
Technical information is subject to change without notifica-
tion to allow for updates.
• This unit is in line with European Standard EN 60601-1-2
and is subject to particular precautions with regard to
• This device is in line with the EU Medical Devices Directive
AAA batteries
• The accuracy of this blood pressure monitor has been
24
electromagnetic compatibility (EMC). Please note that
portable and mobile HF communication systems may
interfere with this unit. More details can be requested from
the stated Customer Service address or found at the end
of the instructions for use.
93/42/EC, the "Medizinproduktegesetz" (German Medi-
cal Devices Act) and the standards EN 1060-1 (non-inva-
sive sphygmomanometers, Part 1: General requirements),
EN 1060-3 (non-invasive sphygmomanometers, Part 3:
Supplementary requirements for electro-mechanical blood
pressure measuring systems) and IEC 80601-2-30 (Medi-
cal electrical equipment – Part 2 – 30: Particular require-
ments for the safety and essential performance of auto-
mated non-invasive blood pressure monitors).
carefully checked and developed with regard to a long
useful life. If using the device for commercial medical pur-
poses, it must be regularly tested for accuracy by appro-
priate means. Precise instructions for checking accuracy
may be requested from the service address.