Deleting saved values
You can delete saved values individually or else you can
delete all of them.
• To delete individual values, first select the stored value
you wish to delete and keep memory button M1 or M2
depressed. The display starts blinking. Keep holding the
button depressed until the display has completely cleared.
• To delete an entire user memory, you have to select the
appropriate user memory. The average is displayed and
indicated with . Hold the memory button M1 or M2
depressed until the display starts blinking and keep the
button depressed until the display completely clears.
7. Cleaning and care
• Clean your blood pressure monitor carefully using a
slightly damp cloth only.
• The frequency of cleaning depends on the contamination
level of the device. Clean the blood pressure device and
cuff as soon as any dirt appears on the device.
• Do not use any detergents or solvents.
• Never hold the instrument under water as otherwise liquid
can penetrate and damage the instrument.
• Never place any heavy objects on the instrument.
8. Rectifying faults
Error messages can occur when
• you move or talk during the measurement (
• inflation takes longer than 25 seconds (
• device has not been inflated sufficiently despite reinflation
(
),
• the inflation pressure is higher than 300 mmHg (
• the batteries are almost empty
In such cases, repeat the measurement. Ensure you do not
move or speak. If necessary, re-insert or replace the bat-
teries.
9. Specifications
Model no.
Measurement
method
Measurement range
Display accuracy
Measurement
inaccuracy
Memory
,
),
Dimensions
23
),
.
BC 60
Oscillometric, non-invasive blood
pressure measurement on the wrist
Cuff pressure 0 – 300 mmHg,
systolic 50 – 250 mmHg,
diastolic 40 –180 mmHg,
Pulse 40 –160 beats/minute
Systolic ± 3 mmHg,
diastolic ± 3 mmHg,
pulse ± 5 % of the value shown
Max. permissible standard deviation
according to clinical testing:
systolic 8 mmHg /diastolic 8 mmHg
2 x 60 memory spaces
L 72 mm x W 80 mm x H 28,7 mm
),