Remarks In Respect Of The Determined Use; Operation Of The Unit - Klauke HSG55 Bedienungsanleitung

Instruction Manual
HSG55
2. Warranty
If correct operation is guaranteed our warranty is 12 months from the time of delivery.
3. Description of the hand-hydraulic cutting unit
The hand-hydraulic cutting tool consists of the following components:
Table 1 (see picture 1)
Pos. Description
1 Latch
2 moving blade
3 Turn screw
4 Pump handle
5 Guiding handle
6 Retract lever
7 non moving blade swinging blade being connected to the lower part of the cutting head via a pin
4.

Remarks in respect of the determined use

4.1 Operation of the unit

Cycle: see pictures in front
The unit is equipped with a double piston pump which is characterised by a rapid approach of the dies towards the
conductor/cable and a slow cutting motion.
HE.13940_A © 06/2010
Function
device to open/close the cutting head
connected to the piston to cut copper and aluminium cables w/o reinforcement only
to activate/de~ the transportation lock
handle to operate the pump
handle to guide and position the tool
lever to activate the pressure relief valve and to return the blades into starting position.
2
GB