Vacuuming
B
A
LED ring colours
37
Usage
Warning!
Always check the appliance and the power cord before
each use. A faulty appliance may cause injury and shall
not be used.
1. Attach the required nozzle.
2. Pull out the power cord to the required length.
3. To switch the vacuum cleaner on, press the ON-
OFF button (A) with your foot.
4. Set the required vacuum power by rotating - / + "
(B) on the vacuum power setting.
prestige | TS 2000 and prestige | TS 2400
Flashes red:
prestige | TS 2400 only
Flashes blue: Standby mode
Flashes yellow: Floor nozzle at park position
Illuminates solidly in green:Low power
Illuminates solidly in yellow: Medium power
Flashes orange: High power
Dust bag is full