Control Elements - Waeco SinePower MSI912 Montage- Und Bedienungsanleitung

SinePower
7.1

Control elements

The inverter has the following connections, displays and control elements on
the back:
No. in
fig. 5, Designation
page 4
1 Terminal
2 RS-232 port,
REMOTE port
3 POS+
4 NEG–
5 Earth terminal
MSI900, MSI1300, MSI1800
The inverter has the following connections, displays and control elements on
the front:
No. in
fig. 6, Designation
page 4
1 Main switch
"ON/OFF/
REMOTE"
switch:
2 "Input Level" LED Displays the input voltage range
3 "Load Level" LED Displays the power being supplied
4 Dip switch
5 Safety socket
EN
Description
Setup operation via remote control
Connection of a PC using a serial RS-232
interface or connection of the MCR-7 or
MCR-9 remote control
Positive terminal
Negative terminal
Earthing on the vehicle bodywork
Description
Switches the device on, off or to operation
via the remote control (accessory)
Makes settings on the inverter (such as
mains voltage, mains frequency, energy-
saving mode).
230 V output
Technical description
43