Specifications - Makita DSC162 Betriebsanleitung

ENGLISH
(Original instructions)
1. Red indicator
2. Button
3. Battery cartridge
4. Star marking
5. Switch Lock
6. Switch trigger
7. Side A
8. Side B
9. Protector
10. Hold Bolt
11. Rebar
12. Blades

SPECIFICATIONS

Max. Cutting Capacity (Dia.mm)
Grade 40 - Grade 60
Grade 40: Tensile Strength 490 N/mm
Grade 60: Tensile Strength 620 N/mm
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
..... Read instruction manual.
............... Flying debris and loud noise hazards.
Wear ear and eye protection.
............... Moving blade. Keep hands clear while
machine is operating. Turn power off
before servicing.
Explanation of general view
13. Stopper
14. More than 200 mm
15. Air Hole
16. Hex Wrench
17. Return Valve
18. Blade A (Thicker Blade)
19. Blade B (Thicker Blade)
20. Bolt (Longer)
21. Bolt (Shorter)
22. Washer
23. Bar Holder
24. Cutter Rod
Model
2
70,000 PSI
2
90,000 PSI
Cutting Speed
Overall length
Net weight
Rated voltage
25. Blade A on Bar Holder
26. Blade B on Cutter Rod
27. Spare Blades
28. Limit mark
29. Rear cover
30. Screws
31. Arm
32. Spring
33. Recessed part
34. Carbon brush cap
35. Hole
DSC162
16 mm
4.0 seconds
380 mm
6.5 kg
Cd
........ Only for EU countries
Ni-MH
Li-ion
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of the European
Directives, on Waste Electric and
Electronic Equipment and Batteries and
Accumulators and Waste Batteries and
Accumulators and their implementation in
accordance with national laws, electric
equipment and batteries and battery
pack(s) that have reached the end of their
life must be collected separately and
returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for cutting rebar.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (LpA) : 80.5 dB(A)
Sound power level (LWA) : 90.1 dB(A)
Uncertainty (K) : 3 dB(A)
DSC191
20 mm
6.5 seconds
412 mm
10.5 kg
D.C. 18V
5