Technical Data; Noise Emission Specifications; Vibration Specifications; Scope Of Supply - Mafell KSS 400 Originalbetriebsanleitung

2.3 Technical data

Universal motor, radio and TV interference
suppressed
Power input (nominal load)
Current at nominal load
Saw blade speed during idling
Saw blade speed at normal load
Cutting depth 0º/45º
Tilting saw unit
Saw blade diameter max/min
Largest thickness basic saw blade body
Tool cutting width
Saw blade mounting hole
Hose connector diameter
Weight without mains cable, without parallel guide fence
Dimensions incl. guiding device (W x L x H)
as cross-cutting system
Cutting depth 0°/45°
Cutting length at 12/49.5 mm (1/2, 1 15/16 in.)
workpiece thickness
Weight with guiding device, without mains cable

2.4 Noise emission specifications

Noise emission values determined according to EN 60745-1 and EN 60745-2-5:
Idling
Machining
The noise measurement was recorded using the saw blade included in the standard equipment.
The values stated do not take into consideration any possible series variances and are not suitable for
determining the rating levels, as these fluctuate in dependence on the time in service, the respective type of
machining and the environmental influences. The noise rating level can therefore only be determined on an
individual basis at the machine user's position.

2.5 Vibration specifications

The typical hand-arm vibration is less than 2.5 m/s

2.6 Scope of supply

Cross-cutting system KSS 400 complete with:
1 carbide-tipped circular saw blade Ø 160 mm (6 1/4 in.), 32 teeth
1 riving knife / splitter (thickness 1.2 mm / 3/64 in.)
1 hose connector
1 parallel stop on item No. 916502, 916530, 916531, 916532, 916535
1 service tool in bracket on the machine
1 carrying case on item No. 916502, 916530, 916531, 916532, 916535
1 operating manual
1 folder "Safety Instructions"
1 support bracket on item No. 916501, 916520, 916521, 916522, 916523, 916525, 916535
Sound power level
102 dB (A)
99 dB (A)
.
2
230 V~, 50 Hz or 110 V~, 50 Hz
1100 W (230 V) or 1100 W (110 V)
4.9 W (230 V) or 10 W (110 V)
5200 rpm
3100 rpm
55/45.5 mm (2 3/16, 1 13/16 in.)
0° – 45°
160/149 mm (6 1/4, 5 3/4 in.)
1.2 mm (3/64 in.)
1.8 mm (5/64 in.)
20 mm
35 mm (1 3/8 in.)
4.0 kg (8,8 lbs)
260 x 750 x 235 mm (10 1/4 x 29 1/2 x 9 1/4 in.)
49.5/40 mm (1 15/16, 1 9/16 in.)
470/400 mm (18 ½, 15 3/4 in.)
5.2 kg (11,7 lbs)
Workplace-related emission value
91 dB (A)
88 dB (A)
-17-