Picture Features; Colour System - JVC Natural Vision AV28CT1EP Bedienungsanleitung

PICTURE FEATURES

PICTURE FEATURES PICTURE FEATURES PICTURE FEATURES
To display the PICTURE FEATURES menu:
Press the a
1
(main menu).
2 Press the 6 button to choose PICTURE
FEATURES, and press the a
AUTO VNR AUTO VNR AUTO VNR AUTO VNR
I I I I
The AUTO VNR function optimally reduces noise of the TV
automatically according to the noise of the current picture.
The function also adjusts the optimum Sharpness (SHARP).
1
Press the
VNR.
5
2
Press the
MIN:
The AUTO VNR function is cancelled. When you set the
mode to AUTO but feel that the sharpness of the original
picture has not be reproduced fully, change the mode to
MIN. However, a noise remaining in the original picture
may be emphasized.
MAX:
This mode always maximizes the noise reduction effect
irrespective of state of the picture. When you set the
mode to AUTO but feel that the noise is remarkable,
change the mode to MAX. However, this may reduce the
sharpness of the picture.
Press the a a button to complete the set- a a
3
ting.
The menu disappears.
16
a button to display MENU
a a
a button. a a
6
buttons to choose AUTO
buttons to choose AUTO.

COLOUR SYSTEM

COLOUR SYSTEM
COLOUR SYSTEM COLOUR SYSTEM
I I I I
The colour system is chosen automatically. However, if the
picture is not clear or no colour appears, choose the colour
system manually.
6
1
Press the buttons to choose COLOUR
SYSTEM. Then press the a
The Sub-menu of the COLOUR SYSTEM function ap-
pears.
5
2
Press the buttons to choose the ap-
propriate colour system.
PAL:
PAL system
SECAM:
SECAM system
NTSC 3.58:
NTSC 3.58 MHz system
NTSC 4.43
NTSC 4.43 MHz system
AUTO:
This function detects a colour system from the input sig-
nal. Only when you are viewing a picture from Pro-
gramme number PR 0 (AV), or EXT terminal, you can
choose using the AUTO function.
Press the a a a button to complete the set- a
3
ting.
The menu disappears.
Note:
• The AUTO function may not function properly if you
have poor signal quality. If the picture is abnormal in
the AUTO function, choose another colour system
manually.
• When in the Programme numbers PR 0 (AV) to PR
99, you cannot choose NTSC 3.58 or NTSC 4.43.
a button.
a a