Banner Timeout - SAGEMCOM RCI88-320 Bedienungsanleitung

AV/SCART-Switching
This menu lets you select whether the video aspect ratio (4:3
or 16:9) is also automatically output on the TV SCART output.
1. Select AV/SCART-SWITCHING with
OK or the right
2. Select the desired state, ON or ALWAYS 16:9 (enable) or
OFF or ALWAYS 4:3 (disable), with
3. Press OK to confirm the new setting.
HDMI Screen Resolution
This menu lets you set the output resolution for your HD TV
set.
1. Select HDMI SCREEN RESOLUTION with
press OK or the right
2. Select the output resolution for your HD TV set (576p, 576i,
720p or 1080i) with
If you have a standard TV, leave the setting at 720p.
3. Press OK to confirm.
4. The receiver switches temporarily to the selected resolution
and asks you to confirm the change.
5. If the resolution is not satisfactory, select NO with
press OK and select another resolution.
6. If the resolution is satisfactory, select YES with
press OK to confirm the new setting.

Banner Timeout

This menu lets you select how long you want the zapping and
information banners to stay onscreen.
1. Select BANNER TIMEOUT with
or the right key.
2. Select the desired timeout, 5 seconds or 10 seconds, with
or .
3. Press OK to confirm the new setting.
or
key.
or .
key.
or .
or , and press OK
44
, and press
or , and
or ,
or and