Troubleshooting - Beem Schneid-FiXX Superior Bedienungsanleitung

Schneid-FiXX Superior
The following table will help you locate and eliminate minor faults:
Fault
The appliance does
not function.
The automatic circuit
breaker in the electri-
cal distribution board
trips.
The grater falls out.
NOTE
► If you cannot resolve the problem with the steps described above, please contact
customer service.
20

Troubleshooting

Possible cause
Plug not inserted into socket.
Automatic circuit breaker in
electrical distribution board
tripped.
The ON/OFF switch was not
pressed properly.
Too many appliances connect-
ed to the same power circuit.
No fault detected.
The safety pin was not cor-
rectly inserted.
Remedy
Insert plug.
Switch on the automatic
circuit breaker again.
Press the middle of the ON/
OFF button (3).
Reduce the number of
appliances on the power
circuit.
Contact customer service.
Put the safety pin into the
fixture and turn it anticlock-
wise until it stops.
BEEM - Elements of Lifestyle
EN