Operation; Main Unit Operation; Auto Operation - Sharp FU-P60S-E Bedienungsanleitung

OPERATION

MAIN UNIT OPERATION

Power ON/OFF Button
1
• Used to start operation (short beep) and stop operation (long beep)
• Plasmacluster Indicator Light and Fan Speed Indicator Light turn on/off.
• Unless unplug the power cord, the operation starts in the previous mode the unit
was operated in.
MODE Selection Button
2
• The operation mode can be switched, and the Indicator Light will turn on.

AUTO operation

The fan speed is automatically switched
(HIGH*, NORMAL, SILENT) depending
on the amount of impurities in the air.
The sensors detect the impurities for ef-
ficient air purification.
15 min. HIGH
The unit will operate at HIGH* fan speed
for 15 minutes, then will operate at Auto
operation.
The operation mode is effective when
quick removal of impurities in the air is
desired.
POLLEN mode operation
The unit will operate at HIGH* fan speed
for 10 minutes, then will alternate
between NORMAL and HIGH for 20
minutes.
10 minutes: HIGH fan speed
20 minutes: NORMAL fan speed
20 minutes: HIGH fan speed
Filter Indicator Light
SENTINEL Operation Indicator Light
Clean-Sign Light
Plasmacluster Indicator Light
operation
*
Plasmacluster
E-8
Main Unit Controls
• AUTO
• 15 min. HIGH
• POLLEN
• SILENT
• NORMAL
• MAX
MODE Selection Button
Power ON/OFF Button
1
2
MAX operation
The unit will operate at a fan
speed of MAX.
NORMAL operation
The unit will operate at a fan
speed of NORMAL.
SILENT operation
The unit will operate quietly
using minimal air intake.
* HIGH fan speed is an
intermediate speed
be tween NORMAL
and MAX.