Gastroback Design Mixer Mini Bedienungsanleitung Seite 49

Problem
The motor is slow-
ing down consi-
derably during
operation or stalls.
The motor stops
during working.
You cannot start
the motor again.
Reason
The mixture in the
blender jug is too
heavy.
Hard ingredients
block the blades.
Switch OFF immediately (turn ON/OFF switch to ›0‹) to
avoid overheating. Then check the following items.
CAUTION:
Do not overload the motor via ingredients,
which are too hard or too large. Do not overfill the blender
jug. Process hard ingredients in portions. The appliance is
not suited for grinding nuts, hard chocolate or other very
hard ingredients.
The blender jug
is not assembled
completely and
correctly.
The blades are
blocked.
The load is too
hard or too heavy.
The Solution
Try the high speed ›2‹. Add some
liquid or reduce the amount of food in
the blender jug. Process your food in
portions.
Crush hard ingredients (e.g. nuts, hard
chocolate) before filling them into the
blender jug.
Assemble the blender jug according to
the instructions in section 'Assembling
the Blender Jug'.
Remove the blender jug from the motor
base and remove the obstacle using
wooden or plastic cooking utensils.
However, do not use violence to avoid
damage to the blade assembly.
Crush very hard ingredients (e.g. nuts,
hard chocolate) before filling them into
the blender jug. Add some liquid or
take out a part of the mixture in the
blender jug. Process your food in porti-
ons. Try speed setting ›2‹.
49