Gastroback Design Mixer Mini Bedienungsanleitung Seite 47

7. With the blades standing still, grasp the blender jug at the handle and remove it
from the motor base. Thereafter remove the lid to check the results or, if required,
push the ingredients down, which are sticking to the inner walls of the jug, using
a plastic spoon.
Note:
If you wish to add some further ingredients only, it is best to remove the measuring
cup from the lid by turning the measuring cup counter-clockwise first and then lift it
up and out. Fill the ingredients via the opening in the lid. Before starting the appli-
ance again, do not forget to replace the measuring cup.
8. If required, close the lid and replace the blender jug onto the motor base. Let the
appliance operate for some further seconds.
9. If your food has reached the desired consistency, switch OFF the appliance
(ON/OFF switch to ›0‹). Thereafter remove the blender jug from the motor base
and remove the lid.
10. Empty the blender jug. Runny food (e.g. beverages or runny batters) may be
poured. With a more heavy and/or sticky mixture, use a wooden or plastic
spoon to take your food out.
11. Clean the appliance immediately after each usage (see: 'Care and Cleaning').
Do not leave any residues dry on the surfaces.
47