Description Of The Appliance; Scope Of Delivery - Kärcher OC 3 Mobile Outdoor Cleaner Originalbetriebsanleitung

Description of the Appliance

These operating instructions describe the maximum
equipment. Depending on the model, there are differ-
ences in the scopes of delivery (see packaging).
See fold-out page 4 for illustrations
1 Trigger gun
2 Water reservoir
3 Water reservoir cover
4 Carry handle for water reservoir
5 Valve
6 Fine filter
7 Storage compartment for small parts
8 Carrying handle of the appliance
9 Power switch
10 Charging box
11 Battery charge indicator
12 Charger
13 Flat jet nozzle
* Optional accessories
14 Conical jet nozzle - for gentle cleaning
15 Universal brush
16 Micro fibre cloth
17 Viscous cloth
18 Fur cleaning brush
19 Accessories box
20 Suction hose
21 Suction hose connection
22 Water filter

Scope of delivery

The scope of delivery of the device is illustrated on the
packaging. Check the content for completeness upon
unpacking.
In the event of missing accessories or any transport
damage, please contact your dealer.
Special accessories
Special accessories expand the possibilities of using
your appliance. Please contact your KÄRCHER dealer
for further information.
14
Blink codes
Battery is being
charged.
Battery is fully charged.
Low battery voltage warn-
ing (approx. 2 minutes op-
erating time remaining).
Battery discharged - de-
vice switches itself off and
cannot be switched back
on.
Malfunction: Motor circuit
breaker has tripped (See
"Troubleshooting").
 Park the appliance on an even surface.
Charge the battery
Illustration
Note: During the charging process, the charge/operat-
ing display blinks. Once the battery is fully charged, it
will be permanently illuminated.
The charging process takes approx. 3 hours.
ATTENTION
Contamination in the water can damage the pump and
the accessories.
 Only fill or suction clear water into the tank.
Water supply from integrated water reservoir
ATTENTION
Do not fill with detergents, pesticides or other additives!
Do not immerse the device into water.
Remove the water reservoir for filling.
Illustrations
Drawing in water from open reservoirs
Illustrations
 Pull the water reservoir straight up.
 Remove the valve and fine filter using the suction
hose connection or a suitable pair of pliers.
 Insert the suction hose connection into the device
in place of the fine filter and fix by turning it 90°.
 Hang the suction hose with the integrated filter into
the water source (e.g. rainwater drum).
ATTENTION
Store the valve and the fine filter safely in the storage
compartment and insert them again prior to use with the
water reservoir.
ATTENTION
Dry running of more than 2 minutes leads to damage to
the pump. If the device does not build up pressure within
2 minutes, switch the device off and proceed in accord-
ance with the instructions in the chapter "Troubleshoot-
ing".
Illustration
The operating time with the battery fully charged is
about 15 minutes. Approx. 2 minutes before the operat-
ing time ends, the charge level indicator will start to
flash.
Operation with conical jet nozzle
CAUTION
Do not direct the spray jet at eyes or ears.
For gentle cleaning of fur and paws or particularly sen-
sitive components.
Illustration
 Install the conical jet nozzle.
– 4
EN
Start up
Water supply
-
-
Operation