Saving/Loading Rechargeable Battery Data; A) Saving Rechargeable Battery Data - VOLTCRAFT V-CHARGE 80GPS Bedienungsanleitung

14. SAVING/LOADING RECHARGEABLE BATTERY DATA

a) Saving Rechargeable Battery Data

• Select the function "Memory Save" in the main menu of the charger with
the button "ESC/MODE/STOP" or "DEC".
• Confirm the selection by pressing the "START/ENTER" button. The
memory number flashes.
• Select one of the 10 memories (0....9) with the button "INC" or "DEC".
When the memory is empty, "NULL" is displayed.
If there already are data in the memory, the display will alternate,
e.g., the rechargeable battery type, rechargeable battery program,
cell number, as well as the charging and discharging current.
• Keep the "START/ENTER" button pushed for approx. 3 seconds to start
setting mode. The rechargeable battery type is displayed first; see figure
on the right.
Briefly pushing the "ESC/MODE/STOP" button will take you one step back or out of the setting mode.
• Select the rechargeable battery type (LiPo, LiIon, LiFe, LiHv, NiMH, NiCd, Pb) with the "INC" or "DEC" button,
then briefly push the "START/ENTER" button.
The following display depends on the rechargeable battery type. A LiPo
rechargeable battery has been selected in the first step in the figure on the
right (see above).
• Briefly push the "START/ENTER" button to switch between the respective
available setting options. The respectively adjustable value flashes.
• Change the flashing value with the button "INC" or "DEC". Keep the respective button pressed for quick adjust-
ment.
• To save the settings, keep the button "START/ENTER" pressed for 3 sec-
onds. The display shows "Saving..." and 3 sound signals are output (if the
sound signals have not been switched off in the setting menu, see chapter
15).
• Then the display shows the indication with the flashing memory number again.
• The "INC" or "DEC" button selects another memory slot to programme it or change an existing programming.
Briefly pushing the "ESC/MODE/STOP" button leaves the setting mode. The charger is in the main menu again.
86
PROGRAM SELECT
Memory Save
MEMORY
NULL
MEMORY LiPo
BAL 3S
BATT TYPE
LiPo Battery
LiPo BAL-CHG
C= 3000mAh
Saving...
[0]
[0]
1.0A
3S
3.0A