Loading/Changing/Saving Rechargeable Battery Data - VOLTCRAFT V-CHARGE 300 TOUCH Handbuch

14. LOADING/CHANGING/SAVING RECHARGEABLE
BATTERY DATA
The charger has a total of 6 memories in which you can save battery data/settings. They
can be loaded again on demand. This way, frequently used rechargeable battery pro-
grammes with the associated rechargeable battery data can be loaded without having to
tediously set them again.
The charger must be in the main menu.
Push the "PROGRAM" button to set up the
memories.
In the delivery condition and after a reset, all
memories are pre-assigned (e.g. 2-cell LiPo
battery), but can, of course, be changed
according to your wishes.
Select one of the 6 memories by pushing the
corresponding key/button as usual.
Use "EDIT" to change the data of your memory;
see below.
Use the button "LOAD" to load the rechargeable
battery data of the memory. The charger will
then jump right to the respective rechargeable
battery function where you can start the associ-
ated rechargeable battery programme.
Use the button "BACK" to return to the main menu.
94