Scalping - Jacobsen Tri King Handbuch

11 QUALITY OF CUT

11.5 SCALPING _______________________________________________________________

NOTE: Arrow indicates direction of travel.
Probable Cause
HOC (height-of-cut) settings are lower than normal.
Improper reel-to-bedknife adjustment.
Turf too uneven for the mower to follow.
Cutting too much grass at one time.
Mowing (ground) speed is too fast.
54
Scalping is a condition in which areas of grass are cut
noticeably shorter than the surrounding areas, resulting in
a light green or even brown patch. This is usually caused
by an excessively low height-of-cut (HOC) setting and/or
uneven turf.
TN0222
Check/adjust the HOC settings.
Adjust reel-to-bedknife setting for desired HOC.
Change mowing direction.
Mow more often.
Reduce mowing (ground) speed.
Remedy