Maintenance And Service; Maintenance And Cleaning; Warranty Condition; After-Sales Service And Application Service - Bosch PLS 300 Originalbetriebsanleitung

OBJ_BUCH-1219-003.book Page 17 Wednesday, January 11, 2017 1:29 PM
Place the break-off cones 16 on a firm surface.
Place the tile on the break-off cones in such a manner that the
break-off cones are positioned below the cutting line and at
the edges of the tile.
Practical Advice
Problem
Tile does not break along the
cutting line

Maintenance and Service

Maintenance and Cleaning

Cleaning
Remove dust and chips after each working procedure by
blowing out with compressed air or with a brush.

Warranty Condition

Through faulty usage, sawing into the guide rail 4 or bridge 8
can occur. No warranty claims whatsoever shall arise thereof,
as this does not affect the function of the saw station.

After-sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the nameplate of
the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Bosch Power Tools
For diagonal cuts, the break-off cones should be positioned
below the cutting line and somewhat further toward the in-
side.
Apply both of your thumb balls at the same time to the outer
sides of the tile until the tile breaks.
Cause
Scoring line not continuous from front to
end
Tile cutter 14 incorrectly inserted
Surface structure of tile uneven
Break-off cones incorrectly positioned
when breaking the tile
Scoring line not continuous from front to
end
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
Corrective Measure
Apply more pressure (uniformly) when scoring the
tiles and score over the complete surface
Insert tile cutter correctly (see figure H1)
Apply more pressure (uniformly) when scoring and
increase the scoring (cutting) speed
Position break-off cones below the cutting line and
at the edges of the tile (see figure H3)
For diagonal cuts, position the break-off cones
somewhat further toward the inside
Increase scoring pressure when cutting the tiles
1 609 92A 1M8 | (11.1.17)
English | 17