Bottom View - MAXDATA Vision 350M Handbuch

USER`S MANUAL

Bottom View

1
2
Warning:
Do not open the CPU
heatsink/fan cover and
do not block this airway
completely.
Otherwise it may result
in permanent system
electrical damage or
cause thermal issue
which is not covered by
the manufacturer`s
warranty.
Warning:
As upgrating your
CPU, please be
cautioned against the
heatsink/fan. The
axle of heatsink might
be twisted by heavy
press. It is not
covered by the
manufacturer`s
warranty.
1-10
1. Fixing Screw
The fixing screw locks the hard disk drive bay cover, which
prevents the hard disk drive from dust and dirt, in place.
2. Hard Disk Drive Bay
This is where the hard disk drive located. The hard disk
drive stores all the system data. For the flexible design,
the hard disk drive can be upgraded to a larger capacity.
(Refer to Section 4 for instructions on a hard drive upgrade.)
3. CPU Heatsink/Fan Bay Cover
The CPU heatsink/fan bay is where the air is drawn into the
notebook for internal thermal regulation. Do not block this
airway completely. Do not remove this cover. There is no
user-serviceable parts inside.
4. Fixing Screw
The fixing screw locks the CPU heatsink/fan bay cover,
which prevents the CPU module from dust and dirt, in place.
3 4 5
7
6