DJI WCH2 Bedienungsanleitung Seite 5

Using the Charging Hub
Use the INSPIRE
4920mAh-7.6V) for illustration.
Place the battery into the Charging Hub, and connect connector B
of the battery charger to the charging hub, then connect the battery
charger to a power outlet (100-240V, 50/60Hz). The Charging Hub
will intelligently charge batteries in sequence according to battery
power levels from high to low. The buzzer will begin beeping when
charging is complete. Remove the battery or turn off the Buzzer
Switch to stop it. Refer to the "Status LED Description" section for
more information about Status LED blinking patterns.
B
DO NOT charge the Intelligent Flight Battery together
with the Intelligent Battery when using the Inspire 2,
PHANTOM
USB power supply port can be used to charge the mobile
device of 5V/2A.
4
TM 2 charger and Intelligent Battery (WB37-
TM 4 Series Charger or Inspire 2 Car Charger.
B
A