Preparation Of The Skin; Removal Of Calluses - DS Produkte AP-3RP Gebrauchsanleitung

Preparation of the Skin

Before using the device, wash your feet and dry them
well. Make sure that your feet have no cream or oil resi-
dues on them.
The drier the skin, the better it can be worked on
with the device.

Removal of Calluses

1. Remove the protective cover from the device.
2. To remove thick calluses (e.g. on your heels), you re-
quire the coarse blue roller. To remove dry and thin
callus areas, use the fi ne magenta-coloured roller.
Make sure that the correct roller is inserted in the
device and is undamaged. If it is not, exchange the
roller (see the "Changing the Roller" section).
CAUTION: If you press the device too fi rmly against
your skin, the roller will come to a stop to prevent skin
injuries.
5. Do not allow the device to rotate on a spot on the skin
for longer than 3 seconds. Now and then, check the
3. Switch on the device by simultane-
ously pressing the release button on
the switch and sliding the 01 switch
upwards (1 will now be visible be-
neath the switch).
4. Place the rotating roller against the
callus which is to be removed and
move the device back and forth and
to the sides on the callus. Move the
device slowly and without pressure.
28