Maintenance; Technical Specifications; Safety Instructions - VOLTCRAFT P9-2 Bedienungsanleitung

Maintenance

Disconnect the charging set, the power supply unit and
the adapter from all the current supply sources before
carrying out cleaning or maintenance work. For the
external cleaning make only use of a soft, dry cleaning
cloth. Ensure to avoid dampness or cleaning agents.
Maintenance and repair work must be carried out by an
expert who is familiar with the relevant regulations (VDE
100, VDE 0701).
Disposal
Dispose of the defective device according to the rele-
vant statutory requirements.

Technical specifications

Power supply :
Charging current :
Discharge charging
current (Trickle) :
Charging voltage :
Dimensions :
Mass:
12
230V/50Hz AC
70mA / 1,4 VA
7mA
9,8 V DC
(H x W x D) 95 x 63 x 89 mm
approx. 220g
Any use other than the one described above
damages the product. Moreover, this
involves dangers such as e.g. short-circuit,
fire, electric shock, etc. Always observe the

safety instructions.

Scope of delivery
9 V block quick charger P9-2 with minus delta U termi-
nation and discharging function · operating instructions.
Safety instructions
In case of any damages which are
caused due to failure to observe these
operating instructions, the guarantee will
expire. We do not assume liability for
resulting damages.
The exclamation mark in the triangle
indicates important information of these
operation instructions. Please read the
operating instructions completely before
putting the device into operation.
For safety and approval reasons it is not permitted to
open or modify the device.
9