Explanation Of Symbols - Ikra IEAS 600 Gebrauchsanweisung

2. Explanation of symbols

The following symbols are used on this electric tool. You can operate this electric tool more safely and effectively
with the correct interpretation of these symbols.
SYMBOLS
If you do not adhere to the instructions and safety measures described in the Operating Instructions
severe injuries may occur. Read the Operating Instructions before you start and operate this device.
Wear eye and ear protection devices when operating this device. Falling objects may cause serious
injuries of the head; wear a head protection when operating this device.
Unplug immediately if the power cord or plug becomes damaged !
Do not use the tool under wet weather conditions!
Protection class II
Confirms the conformity of the electric tool with the Directives of the European Community.
Use suitable work gloves.
Clothing must be sturdy and snug-fitting, but allow complete freedom of movement.
Use suitable safety boots with non-slip soles.
This device may not be disposed of with general/household waste. Dispose of only at a desig-
nated collection point.
Your power tool is not insulated against electric shock. To reduce the risk of electrocution, never
operate this power tool in the vicinity of any wires or cables (power, etc.) which may be carrying
electric current. Electricity can jump from one point to another by means of arcing. Higher
voltage increases the distance electricity can arc. Electricity can also move through branches,
especially if they are wet. Maintain a clearance of at least 50 feet (15 m) between the pole
trimmer (including any branches it is contacting) and any electrical line carrying live current.
Before working with less clearance, contact your electric utility and make sure the current is
turned off.
Guaranted acoustic capacity level 104 dB(A)
GB | Operating Instructions
MEANING
4