EUROM AC7000 Bedienungsanleitung Seite 32

is higher than the indoor temperature.
4. Press the 'Fan' (C) button (a.b.: I) to control the speed of the fan.
De-humidification
To remove excess humidity from a room.
1. Press the 'Power' (A) button.
2. Press the 'Mode' (B) button several times until the 'de-humidification' (3) icon lights up. If you are
using the remote control, press button G (de-humidification).
The fan will automatically operate at the lower setting.
Ventilation
In this mode the outdoor unit does not work and the indoor unit ventilates.
1. Press the 'Power' (A) button.
2. Press the 'Mode' (B) button several times until the 'ventilate' (4) icon lights up. If you are using the
remote control, press button L (ventilate).
3. To change the ventilator speed press button C (Fan, or fan speed)
Timer
Use the timer button (H) on the remote control to set the length of time after which a working airco
must switch off, or an inactive airco must switch on.
Setting de-activation time
Setting while the airco is switched on
1. Press the timer button (H) on the remote control – the timer light (7) on the display will light up.
2. Set the de-activation time by pressing the D & E buttons. Every time you press the buttons the set
time changes by one hour (max. 24 hours). The display briefly shows how much time has been set,
after which it shows the set temperature again.
You can cancel a set time by returning it to 0 or switching the device off.
Setting the activation time
Setting while the airco is switched off.
Ensure that the plug is in the socket! The airco will resume operation in the last mode used.
1. Press the timer button (H) on the remote control. The time light (7) on the display will light up.
2. Set the activation time by pressing the D & E buttons. Every time you press, the set time changes
by one hour (max. 24 hours). The display briefly shows how much time has been set, after which it
returns to the set temperature. The airco will switch on at the set time.
You can cancel a timer time or switch the device off by pressing the timer button H twice.
~ 32 ~