Remote Control Operation - Sharp FU-S63E Bedienungsanleitung

REMOTE CONTROL OPERATION

POWER ON/OFF Button
• When you press the POWER
ON/OFF Button, a short
beep will sound and opera-
tion will start in AUTO Mode.
• Unless unplug the power cord,
the operation starts in the
previous mode the unit was
operated in.
• To stop, press the POWER
ON/OFF Button again.
A long beep will sound and op-
eration will stop.
Auto (Fan Speed) Button
The fan speed switches auto-
matically depending on the
amount of impurities in the air.
Off Timer Button
The set time switches every time
the button is pressed as shown
below.
1 hour 4 hours
Cancel
• The indicator light shows the
remaining time.
• The unit will stop operation
when the timer is up.
Plasmacluster Ion Mode Selections
Colour of Plasmacluster
Mode
Indicator Light
Green
AUTO
The room air is clean.
Blue
The room air is impure.
First 10 minutes since AUTO
mode is selected.
(regardless of air condition)
The air environment is
favourable for activation of
mold, virus, and allergen.
CLEAN
Blue
OFF
Off
Operations available with
the Remote Control
• AUTO
• MANUAL
• POLLEN
• OFF TIMER
• Lights ON/OFF
Plasmacluster Ion mode
selections
Transmitter
• AUTO
• CLEAN
• OFF
LIGHTS ON/OFF Button
Switches the Plasmacluster
Indicator Light, CLEAN-SIGN
Light and MIST Operation
Indicator light either ON or
OFF.
Operation
The unit detects the dust, mold or airborne
microbes using its sensors, and controls the
generating amount of positive and negative ions
automatically.
When room air is impure, approximately same
numbers of positive and negative ions will be
released.
When room air is clean, negative ions will be
released in an increased rate and controls the
ion balance.
The same numbers of positive and negative ions
are discharged.
The generation of ions will stop.
E-11
Manual (Fan Speed) Button
The fan speed can be
switched among Silent,
MEDIUM and MAX settings.
SILENT MED MAX
Pollen Mode Operation
Button
See Page E-10