Product Description And Specifications; Intended Use; Technical Data; Product Features - Bosch GLL 2-10 Professional Originalbetriebsanleitung

OBJ_BUCH-2825-001.book Page 13 Wednesday, April 13, 2016 12:02 PM
 If the text of the warning label is not in your national
language, stick the provided warning label in your na-
tional language over it before operating for the first
time.
Do not direct the laser beam at persons
or animals and do not stare into the di-
rect or reflected laser beam yourself, not
even from a distance. You could blind
somebody, cause accidents or damage
your eyes.
 If laser radiation strikes your eye, you must deliberate-
ly close your eyes and immediately turn your head
away from the beam.
 Do not make any modifications to the laser equipment.
 Do not use the laser viewing glasses as safety goggles.
The laser viewing glasses are used for improved visualisa-
tion of the laser beam, but they do not protect against laser
radiation.
 Do not use the laser viewing glasses as sun glasses or in
traffic. The laser viewing glasses do not afford complete
UV protection and reduce colour perception.
 Have the measuring tool repaired only through quali-
fied specialists using original spare parts. This ensures
that the safety of the measuring tool is maintained.
 Do not allow children to use the laser measuring tool
without supervision. They could unintentionally blind
other persons or themselves.
 Do not operate the measuring tool in explosive environ-
ments, such as in the presence of flammable liquids,
gases or dusts. Sparks can be created in the measuring
tool which may ignite the dust or fumes.
Keep the measuring tool and the rotating
mount 18 away from cardiac pacemakers.
The magnets inside the measuring tool and the
rotating mount generate a field that can impair
the function of cardiac pacemakers.
 Keep the measuring tool and the rotating mount 18
away from magnetic data media and magnetically sen-
sitive equipment. The effect of the magnets inside the
measuring tool and the rotating mount can lead to irrevers-
ible data loss.
Product Description and
Specifications
Please unfold the fold-out page with the representation of the
measuring tool and leave it unfolded while reading the operat-
ing instructions.

Intended Use

The measuring tool is intended for determining and checking
horizontal and vertical lines.
Bosch Power Tools

Technical Data

Line laser
Article number
1)
Working range, min.
Levelling Accuracy
Self-levelling range, typically
Levelling duration, typically
Operating temperature
Storage temperature
Relative air humidity, max.
Laser class
Laser type
C
6
Divergence of laser line
Tripod mount
Batteries
Operating duration in operating
mode
– Cross-line operation
– Line operation
Weight according to
EPTA-Procedure 01:2014
Dimensions
Degree of protection
1) The working range can be decreased by unfavourable environmental
conditions (e.g. direct sun irradiation).
The measuring tool can be clearly identified with the serial number 9 on
the type plate.

Product Features

The numbering of the product features shown refers to the
illustration of the measuring tool on the graphic page.
1 Exit opening for laser beam
2 On/Off switch
3 Automatic levelling indicator
4 Power indicator/Battery warning
5 Horizontal laser line button
6 Vertical laser line button
7 Battery lid
8 Latch of battery lid
9 Serial number
10 Laser warning label
11 Tripod mount 5/8"
12 Tripod mount 1/4"
13 Protective pouch
14 Laser viewing glasses*
15 Construction tripod (BT 150)*
16 Measuring plate with stand*
17 Telescopic rod (BT 350)*
18 Rotating mount(RM 1)*
English | 13
GLL 2-10
3 601 K63 L..
10 m
±0.3 mm/m
±4°
<4 s
–10 °C ... +50 °C
–20 °C ... +70 °C
90 %
2
630–650 nm, <1 mW
1
0.5 mrad (full angle)
1/4"; 5/8"
3 x 1.5 V LR6 (AA)
9 h
17 h
0.49 kg
112 x 55 x 106 mm
IP 54 (dust and splash
water protected)
1 609 92A 2K0 | (13.4.16)